System 3

Sets of resin and hardener in proper ratios Silvertip Epoxy is a premium laminating resin from System 3. Not only is it designed to have all the best characteristics for boat building, but it has the best pot life to cure time ratio of any epoxy I have...

Individual bottles of resin - click HERE for hardener Silvertip Epoxy is a premium laminating resin from System 3. Not only is it designed to have all the best characteristics for boat building, but it has the best pot life to cure time ratio of any...

System Three Marine Spar Varnish is a high-build coating designed for marine epoxy and exterior wood surfaces such as railings, doors or any surface where a clear, durable gloss finish is desired. System Three Marine Spar Varnish contains...

A premixed thixotropic glue - Tubs available HERE GelMagic is a toughened, non-sagging, two component, structural epoxy adhesive designed for superior bonding to wood and most porous materials. Measuring is easily accomplished by either volume or...

QuikFair is a lightweight, microballoon-filled, fast-curing two-part epoxy fairing putty with excellent moisture resistance. The two color-coded parts have a non-sagging, butter-like consistency and are easily mixed to form a third color. At 77ºF...

Pennant Primer is a waterborne, two-part epoxy coating specifically formulated as a tough, below-the-waterline primer for marine topcoats. Though Pennant Primer was specifically designed for use with System Three Pennant Topside Paint, it is...

high strength thickening agent for epoxy The most popular thickening agent for epoxy, silica makes a smooth, non-sagging, high-strength mixture for structural bonding, filleting and filling. Mix both epoxy resin and hardener then add silica until the...

Five Minute epoxy system Quick Cure-5 is the standard quick setting "five minute epoxy" system. Mix at a 1:1 by volume ratio. Quick Cure is ideal for all small jobs requiring a strong bond and rapid cure. Quick Cure is highly water resistant but not...

Fillet mix in a tub EZ-Fillet is a wood flour-filled two-part putty specifically designed for stitch-and-glue wooden boat construction. Its ketchup-like, self-leveling consistency allows it to be measured by volume or weight. The resin (part A) is brick...

Everyone knows it is dangerous to have slick surfaces on a boat. And everyone seems to have a formula for making a non-skid surface. You have heard of using such household materials as salt or sugar and you have seen exotic materials that cost an arm and...

A premixed thixotropic glue - Tubes available HERE GelMagic is a toughened, non-sagging, two component, structural epoxy adhesive designed for superior bonding to wood and most porous materials. Measuring is easily accomplished by either volume or...

Clear Coat is an extremely low viscosity, water white, "penetrating" epoxy system. Clear Coat cures to a brilliantly clear, very tough finish without the usual "amine blush" associated with some epoxy resin films. Clear Coat contains no volatile solvents...