Contact         Home         About        Catalog         FAQ         Duckworks Magazine
 

boat plans

canoe/kayak

electrical

epoxy/supplies

fasteners

gear

hardware

hatches/deckplates

media

paint/varnish

rope/line

rowing/sculling

sailmaking

sails

tools

 

Pintle & Gudgeon Fastener Kits

10-24 Machine Screw Kits - $4.80
QTY
1/4-20 Machine Screw Kits - $8.90
QTY

10-24 Machine Screw Kit
(each kit contains 12 10-24 x 2-1/2" machine screws, 12 nuts & 12 washers)

Recommended for the following sets:

1/4-20 Machine Screw Kit
(each kit contains 12 1/4-20 x 3" machine screws, 12 nuts & 12 washers)

Recommended for the following sets:

Pintle and Gudgeon Fastener Kits

Pintles and Gudgeons should always be bolted on. Period. We resisted trying to make kits for all the different pintle and gudgeon sets we sell because there are so many different lengths of bolts needed. Finally we figured out that we could supply kits with bolts long enough for most installations and so we have these. Rudder and transom thicknesses vary so much that trying to match them to bolt lengths is all but impossible anyway. With these kits, you will probably have to trim most of the bolts but that is often necessary anyway.


Feedback

Excellent quality - truly. That is one fantastic product there. My rudder won't fail on me - not because of the pintle/gudeons or fasteners.

Andy Linn