Give your Kayak that professional look with these hatch covers. Each consists of two parts: a rigid flange ring that mounts to the deck of your boat, and a softer "rubbery" cover that closes to a water tight fit.
All three hatches have 1/8" thick flanges with about 1/4" of space between the top of the flange and the bottom of the cover.
Note: Each cover has a tab with two holes to attach a lanyard, but no lanyard is included.
Weights:
8" Round - 1 lb - 1 oz
10" Round - 1 lb 4 oz
17" Oval - 2 lbs 9 oz

NOTE: the drawing below shows a cross section of the flange ring.The 'Locator' is a ring all around the flange that fits down into the hole that is cut for mounting the hatch. The 'Seal lip' engages the rubbery cover to create a seal and to keep the cover in place.

Size |
A |
B |
C |
D |
8" |
7-9/16" |
1-13/16" |
9-5/16" |
3/4" |
10" |
9-1/2" |
1-13/16" |
11" |
5/8" |
17" Oval |
9"
16-1/4" |
2-3/16" |
11-1/16"
18-3/8" |
3/4" |
FEEDBACK:
Just received the hatches and I am absolutely pumped! The 9x17 hatch is awesome! I wasn't expecting it to be so high quality with the rigid center and rubberized outer edge. I wish it was predrilled, but I can operate a drill... Thanks for offering great products at a great price!
Dan St. Gean

Here is the large, oval hatch installed on one of the amas of
Dan's boat at the 2009 Texas200
|