Contact         Home         About        Catalog         FAQ         Duckworks Magazine
 

boat plans

canoe/kayak

electrical

epoxy/supplies

fasteners

gear

hardware

hatches/deckplates

media

paint/varnish

rope/line

rowing/sculling

sailmaking

sails

tools

 

Balch Boats "Stow-A-Way" Sail Tie System

one complete kit - $24.95


all parts and complete instructions come with the kit

Stow-A-Way® eliminates the need for all sail ties, is easy and convenient to use and self-stows under the boom until needed.

Stow-A-Way® requires only simple tools and about 20 minutes to install, is made of high-quality materials and is an excellent value costing less than a set of sail ties.

  • Stow your mainsail easily
  • Works on any sailboat
  • Easy to install
  • Easy to use
  • Durable
  • Great Gift

The Stow-A-Way Story

In the summer of 2008, I singlehanded a Tanzer 22 up the Maine Coast. I started the journey in Pott's Harbor, near Brunswick, and ended in Rockland; a journey totalling some 75 nautical miles I covered over 6 days of what turned out to be very mixed weather.

I had just purchased the boat and wanted to get to know her and to move her to a mooring I owned in Penobscot Bay. I figured a multiday trip was just the ticket to accomplish these goals.

Toward the end of my first day, moving along briskly at just under 6 knots, I turned sharply north into the wind to drop sail and motor into my harbor for the night. The winds were strong, approximately 25 knots, a wind strong enough to make maneuvering tricky. Rocky ledges surrounded me, leaving me little room for mistakes.

As I motored into an especially narrow passage my sail flapped loosely in the cockpit. I simply could not safely afford the time away from motor and helm to secure it with my sail ties. Emerging into the harbor, I encountered little reduction in wind, and a dense field of lobster pots!

Non-coastal sailors will need to understand that getting the motor's prop tangled in a "pot warp" or piece of rope securing the lobster buoy to the pot, would likely end up in a stalled engine, and uncontrolled drift of the boat. If the prop could not be cleared quickly, the boat would be dashed by wind and waves onto nearby ledges. This was not part of my plan.

The lobster pot field had to be navigated very precisely. In the mouth of the harbor, the wind lessened slightly, but changed direction and began to curl into my cockpit from a different angle and catch under my sail. A sharp gust of wind lifted the sail and deposited it over my head! I pawed the sail off of my head, knocking my glasses off in the process. I blurrily finished navigating that field without further incident, but wondered then and there what might be a way to better manage a dropped sail so this situation would not be repeated.

Months later, the idea for the Stow-A-Way came to me when I was thinking back on that situation and wondering what I could or should have done differently. I recognized that I was reluctant to leave the helm in such strong wind to get my sail ties from where they were stowed below, or to tie the sail down.

In retrospect, I realized I should have stopped and dropped sail farther out, and motored a longer distance. Still, I thought it should be possible to handle the kind of situation I'd found myself in more efficiently- by not being dependent on sail ties.

My thoughts went to those sail ties, and what I did not like about them. I determined that my three biggest objections to sail ties were:

  1. They are stored somewhere other than where they are used. They are separated from their place of use as part of their normal use. This seemed really screwy to me right from the start.
  2. They are handled individually. There are 3-4 separate pieces to keep track of. They get dropped, blown overboard, lost, and tangled, and "borrowed" for other purposes.
  3. They must be fastened at several different points along the boom to secure the sail properly. This entails tying several knots. In really poor conditions this can be somewhat challenging.

So what would work better? What would I want a new idea or invention to do?

I decided a new system had to do and not do the following:

  • It had to quickly and adequately secure the mainsail when not in use.
  • It had to be extremely easy for one person to use
  • Critically important, it had to self-stow where it will be used so it is always available for immediate use.
  • The system could require no more than four fastening "stations," and no knots.
  • Fasten and unfasten in under 1 minute, and be bombproof.
  • The system had to eliminate the possibility of tangles, loss of components, and avoid complex actions to be performed.
  • Not cost an arm and a leg. I, and many other sailors as well, am on a budget!

One night, as sometimes happens, my sleeping mind came up with an idea. Over the next few weeks I mulled it over, sketched the idea out, revised, sketched, scratched my head and figured out a design. I gathered materials to develop a prototype.

My first installation was on a 14' Flying Tern Sailboat. I spent about 25 minutes installing the system, a little longer than I thought it should take, but with no conflicts between existing sail hardware and the new system.

To my delight, the first and informal test of my system worked absolutely perfectly! The time had come to name my invention; I christened the system the Stow-A-Way since it self-stows out of the way when not needed.

I gathered more materials and installed the Stow-A-Way on another of my boats. Installation on the second boat, my Tanzer 22, went smoothly and also without any conflicts with location or function of existing sail hardware. I tracked installation time for the system on the Tanzer at 18 minutes. I was improving! Now it was time to really test the invention and see if it was what I'd hoped.

Testing the Stow-A-Way:

As noted above, I equipped the two sailboats each with Stow-A-Way system. I also had a traditional system of sail ties for each. The mainsail was dropped and loosely gathered on the boom of the Flying Tern Sailboat between each test, and then the Stow-A-Way system was used to secure the sail. The time to secure the sail was recorded. This was repeated 10 times and the average of all times determined. For the sail ties test, the mainsail on the Tern was again dropped and loosely gathered between each test, and a system of 4 sail ties was used to secure the sail (starting with all the sail ties in hand.) The time to secure the sail was again recorded. This was also repeated 10 times with the average calculated in the same manner.

On a Saturday in July of 2012, I tested the Stow-A-Way on the Tanzer 22. I repeated the same tests as already described. Times for each system on each sailboat were averaged, and efficiency calculated, as presented in the chart below.

Comparison of time and
efficiency between STOW-A-WAY
and Sail Tie systems
FLYING TERN
(14' sailboat w/ 8'0" boom)
TANZER 22
(22' sailboat w/ 9'3" boom)
System Avg Time Efficiency Avg Time Efficiency
STOW-A-WAY 28.5 sec Stow-A-Way is
almost 2x efficient
33.8 sec Stow-A-Way is
over 2x efficient
SAIL TIES (4) 53.6 sec 70.6 sec

There was one additional consideration to the sail tie tests.I began the sail tie tests with the sail ties in hand as opposed to stowed. This means that the actual time locating and readying the ties for use was not included in the results, and certainly would have added to the time of the that system's tests if included.

After all the tests I informally thought about what makes this system "work" for me.

Mostly, I love the fact that the Stow-A-Way is right there, ready to be used. I also love the fact that the system is simple and foolproof. I love that it is faster than sail ties. I thought back to the sail flapping over my head day in Maine and honestly asked myself; "Does the Stow-A-Way solve the problem I experienced that day?" When I consider how very little time I would have had to leave the helm to secure the mainsail the answer is a resounding YES!

Both of my boats have been equipped with a Stow-A-Way for a year. I still enjoy and appreciate the system.

In that intervening year I have located bulk manufacturers and suppliers for all the Stow-A-Way components. I have assembled the system into a simple kit that can be installed on just about any boat (maximum boom length of 14') in 20 minutes or less. Each kit contains everything you need to have a Stow-A-Way of your own. All components are marine grade, and will provide years of service. Finally, to meet the "sailor on a budget" criteria, the suggested retail price is under $25.00!

I have decided to offer the Stow-A-Way to you, the sailing fraternity, for your boats. It simply adds to the pleasure of sailing.

Fair winds!
John C. Balch