null

Rudder & Tiller

Rudder & Tiller

  • Product
  • Qty in Cart
  • Quantity
  • Price
  • Subtotal
  • Weekender Vertical Gudgeon

    Weekender Vertical Gudgeon

    $13.80
    These gudgeons were developed for the Weekender Set, but will work with many of our 3/8" pintles. (see chart to figure out which will work) They are designed to be mounted vertically in cases where the boat is a double-ender or where a...
    $13.80
    Qty in Cart: 0
    Quantity:
    Price:
    $13.80
    Subtotal:
  • Rudder Hardware for Scamp

    Rudder Hardware for Scamp

    $76.99
    This set is recommended by John Welsford for Scamp. The tangs are 2-1/8 inches wide and the pintles have a sturdy 3/8" pin.This set consists of two gudgeons and two pintles. There is no hold down included. All parts are stainless steel. (note: pintle...
    $76.99
    Qty in Cart: 0
    Quantity:
    Price:
    $76.99
    Subtotal:
  • Racelite 1/2" Pin Heavy Duty Pintles

    Racelite 1/2" Pin Heavy Duty Pintles

    $19.99
    1/2" pins - 1" & 2" rudders These pintles come in two widths and with either short pin or long pin. There is no gudgeon included. All parts are stainless steel - Fits 1" or 2" thick rudder. (note: pintle tangs can be easily adjusted for rudders as...
    $19.99
    Qty in Cart: 0
    Price:
    $19.99
    Subtotal:
  • Racelite Heavy Duty Rudder Gudgeons

    Racelite Heavy Duty Rudder Gudgeons

    $22.99
    See our pintle & gudgeon compatibility chart Our RL-690 rudder gudgeons are similar to our RL-490 pintles but with no pin. They can be used with the RL-690 transom pintle or with the RL-490 gudgeon if a bolt or rod is run through...
    $22.99
    Qty in Cart: 0
    Price:
    $22.99
    Subtotal:
  • Weekender Rudder Hardware Set (includes pins and rings)

    Weekender Rudder Hardware Set (includes pins and rings)

    $74.99
    This is a very robust set of stainless steel rudder hardware. The vertical gudgeon that bolts against the transom is a full 1/8th (0.125) of an inch thick and 1.25" wide. The rudder gudgeons are made from 1" wide strap and are 3/32 (0.090)" thick. The...
    $74.99
    Qty in Cart: 0
    Quantity:
    Price:
    $74.99
    Subtotal:
  • Weekender Rudder Gudgeon

    Weekender Rudder Gudgeon

    $18.99
    These gudgeons were developed for the Weekender Set, but will work with many of our 3/8" pintles. (see chart to figure out which will work) They can also be used on a skeg where a regular gudgeon is used as the upper pivot point. Weekender Rudder...
    $18.99
    Qty in Cart: 0
    Quantity:
    Price:
    $18.99
    Subtotal:
  • Racelite Heavy Duty Transom Pintles

    Racelite Heavy Duty Transom Pintles

    $19.99
    Our RL-690 transom pintles are the same as used on most Lightning class sailboats. They are typically mounted on a flat transom and paired with a rudder gudgeon. More details under "Particulars" tab. To find out which gudgeons work with these pintles,...
    $19.99
    Qty in Cart: 0
    Quantity:
    Price:
    $19.99
    Subtotal:
  • Racelite Light Duty Gudgeons

    Racelite Light Duty Gudgeons

    $8.99
    See our pintle & gudgeon compatibility chart Light duty stainless transom mount gudgeon from Racelite. See Particulars for dimensions. RL-358Light duty stainless steel gudgeon 5/8" x 4" x 1/16"pin - 5/16"takes #10 fastener  
    $8.99
    Qty in Cart: 0
    Quantity:
    Price:
    $8.99
    Subtotal:
  • Rudder Hold-downs

    Rudder Hold-downs

    $2.99
    RL-336 - Spring TypeStainless Steel spring rudder hold-down - 4" long x 3/4" wide - may be used with any of our pintles and gudgeons. RL-337 - Swivel TypeStainless Steel swivel hold-down - 1" long x 5/8" wide - may be used with any of our pintles and...
    $2.99
    Qty in Cart: 0
    Price:
    $2.99
    Subtotal:
  • Set of Medium Duty Pintles and Gudgeons

    Set of Medium Duty Pintles and Gudgeons

    $39.99
    This set consists of two gudgeons, one short pin pintle, and one long pin pintle. There is no hold down included. All parts are stainless steel - Fits 3/4" or 1-3/8" thick rudder. (note: pintle tangs can be easily adjusted for rudders as much as 1/4"...
    $39.99
    Qty in Cart: 0
    Price:
    $39.99
    Subtotal:
  • Racelite One Piece Gudgeons

    Racelite One Piece Gudgeons

    $16.96
    A one piece gudgeon ideal for small boats such as PDRacers. Pintle holes are 5/16" but could be drilled to 3/8".Feedback:I recently installed a Racelite 358BR gudgeon as a retrofit on my son's PDRacer (Hull #491). The original rudder hardware consisted...
    $16.96
    Qty in Cart: 0
    Quantity:
    Price:
    $16.96
    Subtotal:
  • Racelite Extra Heavy Duty Gudgeons

    Racelite Extra Heavy Duty Gudgeons

    $15.99
    Extra Heavy duty stainless transom mount gudgeon from Racelite. See Particulars for dimensions. RL-490Extra heavy duty stainless steel gudgeon thickness - .090" plus reinforcing strap3/4" wide x 5-1/4" long x 1" highpin - 3/8"takes...
    $15.99
    Qty in Cart: 0
    Quantity:
    Price:
    $15.99
    Subtotal:
  • Total: items /

Adding your products to cart