Stainless Steel spring rudder hold-down - 4"
long x 3/4" wide - may be used with any of our
pintles and gudgeons.
Stainless Steel swivel hold-down - 1" long x
5/8" wide - may be used with any of our pintles
The rudder hold down is screwed to the transom
just above the lower pintle so that it will block it from
coming out of the gudgeon. It is a good idea to install
a neoprene washer under the hold down to create friction
that will keep it in place. You can just see the washer
under this one.