This set consists of two gudgeons, one short pin pintle,
and one long pin pintle. There is no hold down included.
All parts are stainless steel - Fits 3/4" or 1-3/16" thick rudder.
(note: pintle tangs can be easily adjusted for rudders as much as 1/4" larger or smaller) For additional dimensions see below:
RL-358
Light duty stainless steel gudgeon
5/8" x 4" x 1/16"
pin - 5/16"
RL-358-L
Light duty stainless pintle with long pin
strap - 3-1/4" x 5/8" x 1/16"
pin - 5/16" x 2"
rudder thickness - 3/4" or 1-3/16"
RL-358-S
Light duty stainless pintle with short pin
strap - 3-1/4" x 5/8" x 1/16"
pin - 5/16" x 1-3/4"
rudder thickness - 3/4" or 1-3/16"
Below is a picture of the set with the wide pintles
