The set consists of two gudgeons, one short pin pintle,
and one long pin pintle. There is no hold down included.
All parts are stainless steel and fit 3/4" or 1-3/8" wide rudders.
For additional dimensions see below.
RL-360 gudgeon
Medium duty stainless steel gudgeon
thickness - 5/64"
3/4" x 3-3/4"
pin - 3/8"
RL-360 pintle
Medium duty pintle with long or short pin
strap - 3-1/2" x 3/4" x 5/64"
long pin - 3/8" x 3-1/2"
short pin - 3/8" x 3"
rudder thickness - 3/4"
Note: These pintles are made so that they can be bent 10-20% wider or narrower
RL-360-W pintle
Medium duty pintle with long or short pin
strap - 4-1/2" x 3/4" x 5/64"
long pin - 3/8" x 3-1/2"
short pin - 3/8" x 3"
rudder thickness - 1-3/8"
Note: These pintles are made so that they can be bent 10-20% wider or narrower
