Clickwise from upper left:
RL-790-S; RL-790-L; RL-790-2; RL-790-4
1/2" Pin Heavy Duty
Pintles and Gudgeons
These pintles and gudgeons have 1/2" diameter pins for long wear.
This set consists of two gudgeons - one two hole and one four hole; one short pin pintle,
and one long pin pintle. There is no hold down included.
All parts are stainless steel - Fits 1" thick rudder but can be easily bent 1/8" wider or narrower..
 |
Gudgeons
RL-790-2
1" x 2-1/2" x 3/32"
1/2" pin
mounting holes 1-1/2" oc
RL-790-4
1" x 4-1/4" x 3/32"
1/2" pin
mounting holes:
7/8"|1-1/2"|7/8"
|
 |
Regular Pintles
RL-790-L
tangs - 1" x 4" x 3/32"
pin - 1/2" x 3"
RL-790-S
tangs - 1" x 4-1/4" x 3/32"
pin - 1/2" x 2-1/2"
Pintles fit nominal 1" rudder but will bend 1/8" wider or narrower
|
 |
Wide Pintles
RL-790-LW
tangs - 1" x 4" x 3/32"
pin - 1/2" x 3"
RL-790-SW
tangs - 1" x 4-1/4" x 3/32"
pin - 1/2" x 2-1/2"
Pintles fit nominal 1-3/8" rudder but will bend 1/4" wider or narrower
|
|
