RL-27-1", RL-27-3/4", RL-27-5/8", RL-27-1/2"
These stainless steel cotter rings are used to keep out clevis pins in place. We assume that the fractions in the part numbers relate to the size in inches of the clevis pin that the cotter ring goes with, but in fact, any of these rings will work with any or our pins. The chart below gives the actual sizes of the rings.
|
Part # |
Wire dia. |
OD |
RL-27-1" |
0.050" |
1" |
RL-27-3/4" |
0.047" |
3/4" |
RL-27-5/8" |
0.036" |
5/8" |
RL-27-1/2" |
0.032" |
1/2" |
|
