Contact         Home         About        Catalog         FAQ         Duckworks Magazine
 

boat plans

canoe/kayak

electrical

epoxy/supplies

fasteners

gear

hardware

hatches/deckplates

media

paint/varnish

rope/line

rowing/sculling

sailmaking

sails

tools

 

Woodland 15'
Plans
$80 England & EU
$69 USA/Elsewhere 

This is a clinker/ply open canoe with graceful lines. We have given the hull shape a fairly fine entry so that she glides on the water and also a good waterline beam to allow her to carry a substantial rig for open canoe racing. She has 5 planks per side which are 4mm thick to keep her weight down. The plans give full size templates for the moulds (sections) to be used on the building jig and details are shown for the clinker/ply construction process (please note that we can also develop the plank shapes if a builder wants to build her using simple stitch and tape methods). She can of course be used without the rig as a roomy and stable open canoe to take 2/3 adults but she was designed very much with fast and efficient sailing in mind and to this end, full details are given for the add-on leeboards, rudder and rig which has an area of 43 sq.ft.

Woodland Particulars

LOA 15' 4.58m
Beam 36" 0.92m
Hull Mid Depth 13" 0.33m
Approx. Dry Weight 60lbs 27kg
Approx. Capacity 650lbs 295kg

Hull Shape

5 planks per side round bilge/multi-chine
Construction Method Clinker ply and stitch and tape
Plywood Requirements 4 sheets of 4,5 or 6mm
Guidance Use General purpose and sailing - single or double
Drawing/Design Package 4 x A1 drawings + 2 x A4 instruction sheets + 16 x A4 sheets covering stitch and tape.