This motorboat is based on a typical Maine Lobster boat and has been designed for strip plank construction (although she could be built using clinker/ply techniques using the same moulds). The hull has a high freeboard with flat planing sections aft and tumblehome worked into the hull aft.

She is essentially an open boat with a narrow side decking and bench seating with stowage under, however, she could be fitted out in a number of ways and could take a small cuddy/fore cabin.

LOA 14' 11”(4.57m); Beam 5’11” (1.80m); Approx. weight 250 lbs (113kg).