The Grey Swan is a traditional gaff cutter of multi chine hull shape with a length over deck (LOD) of only 16’ allowing much of her construction to be completed in a small work space. The original plans show her built using pre shaped ply bulkheads and for and aft girders fitted together along with her bottom hull panel into a rigid prefabricated structure. Stringers are then added to this and the remainder of the hull panels applied oversize and trimmed later. The sketch shows the original design with it’s centreboard but during the intervening years since she was first drawn up we have been asked for several modifications. Consequently the plans now show details for bilge keel and long central ballast keel variations, an alternative catboat rig and details and panel shapes for pure stitch and epoxy construction. Although only 16’ in length, she has room for 2 berths inside her cabin and a large cockpit which can also take 2 sleeping under a boom tent. LOD 16’; Beam 7’; Draft 1.15’/4.3’; Approx. wht. 1200 lbs; Ballast 300 lbs. Details are now available for a strip plank version. Plans also include details/mould shapes for strip planking the hull.