Description
These Black Aluminum Pop rivets work in a standard pop-rivet gun. These are perfect for attaching Padeyes and other hardware to plastic kayaks or any surface where you are unable to reach the back side.
 |  |
Each rivet is split into three sections which bend when the rivet is set, automatically adjusting to the overall thickness - up to about 1/2 inch. Requires 3/16" dia hole.
| Part # | A (hole dia) | Grip Range |
|---|---|---|
| K799555 | 3/16" |
1/32"-1/2" |
Related Products
SeaLect Stainless Pop-Rivet Mount Pad Eye
$3.01
The fastener pads are flat topped to accept 3/16" pop rivets or pan head screws.
Eagle Plans PDF
$120.00
Are you being prevented from having a great time on the water by the ever increasing fuel prices? Are you worried about the environmental impact of your power boating activities? Looking to buy a...
SeaLect Tru Course Kayak Rudder Rigging Kit
$52.99
Everything needed to rig your Tru Course Rudder to operate with Rudder Control Kayak Footbraces on most kayaks.
Tiny TRI Plans
$60.00
Here my next small outrigger/trimaran the TINY TRI. The hull of LITTLE TRI has proven itself to be fast, easy to sail, a good boat to camp on and yes seaworthy to. My goal with Tiny Tri is a bit...
Little TRI Plans
$65.00
I have built almost anything that can sail. At the age of 12 my first sail thing, an ice "boat". I used skates which had to be mounted on shoes as runners. Big fun, very fast, only the lake was too...