Home > Boat Plans & Kits > Plans by designer > Michael Storer >

Eureka Canoe

Eureka Canoe


 
  Metric  

This is an instant download. If you want the plans printed and mailed to you, click HERE.
Our Price: $75.00
Qty :

Description Particulars
 

  • Simple to Build
  • Great Paddling Boat
  • Half the weight of most fibreglass Canoes
  • Comprehensive Plan Pack with step by step instructions and many illustrations

The Eureka Canoe is the result of a collaboration between Duck Flat Wooden Boats in Adelaide and Michael Storer Design. It is built stitch and glue - a simple method where the panels are cut out and stitched together temporarily while the joins are sealed with fibreglass tape.

Generally fibreglass boats come in at about double the weight of this one and don't come anything close to being classic paddling boats. The Eureka has demonstrated that it goes a long way with modest effort and tracks well when the waves and wind are up.

We Jointly Developed the Eureka over several prototypes to produce the best mix of performance, light weight, good looks and most importantly for a kit to be exported to Japan, to be foolproof in assembly.

The EUREKA canoe hullshape is computer generated which allows much greater freedom in shape than traditional manual methods.

This boat is built slightly differently to most stitch and glue boats. The bilge panels are fitted to the bottom panel, the topside panels are then attached to the bilge panels - we use plastic cable ties. The width at the sheer is located then the hull is filleted and/or glass taped together. Gunwales, inwales, end decks and buoyancy tanks, seats, and spreader bars are then fitted.

The Eureka has stability without a too blunt shape, which produces a boat more suitable for long distance travelling or where carrying a load. The boat pictured below came in at 15.5kg (34lbs) finished with a lot of effort made to keep the weight down - 3mm (1/8") ply instead of the 6mm specified, lightweight fibreglass on the bottom, use of selected lightweight timbers for the trim and those really cool lightweight seats. A boat built to the normal specifications tends to come in a bit over the 43lb mark. Half the weight of a 'glass boat.

Reports of the first boat launched show it to be much easier to paddle than the usual plywood canoe, and indeed much better than most production glass hulls - this becomes important where distances are being covered - greatly reducing the effort required from the paddlers.

The other major bit of feedback is on the appearance - the EUREKA is a very handsome boat - quite unusual for the average plywood boatbuilding project.

These plans include all the instructions, bill of materials, drawings, etc. that you get with the instant download. Postage is added to cover shipping of the printed plans. No postage is charged for the instant download.