Home > Hardware > Rowboat Hardware > Bronze Oarlocks & Sockets >

Douglas Oarlocks




 
Sold as a pair
Our Price: $58.00
Qty:

Description Particulars
 

If you are really into rowing, you may want to consider moving up to these specially shaped Manganese Bronze Douglas Oarlocks. This lock will work with any of our premium brass sockets (see links at right).

To get a perfect rowing stroke the oar can’t have too much forward pitch or it will dive. If you have too much rearward pitch the oar won’t lock on the water, either way the oar and boat performance suffer. For the oar to be its most efficient it should be held at a 6 degree pitch. The way to achieve this pitch is with flat forward bearing surface oarlocks and “D” shaped oars or oars with flat sided sleeves. Racing oars and oarlocks have always had had controlled pitch for maximum performance. Occasionally rowers with more traditional boats have adopted the technology but it wasn’t a pretty sight. Now we have a better solution, a 6 degree pitch, “424” manganese bronze oarlocks that will fit a standard ½” oarlock socket. The Douglas Oarlock was designed by boat designer, sculptor Doug Martin to produce perfect 6 degree pitch and to be beautiful.

Oars

Traditional oars usually have two shaft shapes where they fit into the oarlock, round or D shaped. The D shaped oar can be used with no modification other than a plastic sleeve to protect the shafts of the oar from wear and the addition of buttons to hold the oars at their proper extension.

Round oars of 1 ¾” diameter can be equipped with flat sided sleeves and buttons to achieve that flat stroking surface for 6 degree pitch. (see photo above)

Links

For more information, click the icon below for an article reprint from "Ash Breeze" the journal of the Traditional Small Craft Association of Mystic CT.