Home > Hardware > General Boat Hardware > Hatches, Deckplates, Vents >

Seadog Quarter Turn Deck Plates - Black & White




 
Seadog quarter-turn deck plates come in black or white in 4, 5, 6 and 8 inch nominal sizes (see sizing chart below). They are easy to open, easy to close, and they click when they are fully shut. You don't have to screw and screw and worry about crossing the threads. One fourth turn is all that is required to close. The black O-ring makes them watertight. Note: Avoid contact with acetone or strong solvents.

More below.
A quick opening deckplate

Item# Item Name Our Price Qty Add
SD-336140 Quarter Turn Deck Plates - 4" White
$7.82
SD-336145 Quarter Turn Deck Plates - 4" Black
$8.84
SD-336150 Quarter Turn Deck Plates - 5" White
$9.36
SD-336155 Quarter Turn Deck Plates - 5" Black
$8.99
SD-336160 Quarter Turn Deck Plates - 6" White
$11.29
SD-336165 Quarter Turn Deck Plates - 6" Black
$10.84
SD-336180 Quarter Turn Deck Plates - 8" White
$13.55
SD-336185 Quarter Turn Deck Plates - 8" Black
$12.99
Check the items you wish to purchase, then click


Particulars:

Sea-Dog Line Quarter-Turn Deck Plate is UV stabilized and features a new locking system that prevents over tightening, jamming and cross threading. Easy to open and close. A specially engineered lubricated gasket is used in conjunction with a knife edge for a leak tested seal.

Part No.
A
B
C
D
SD-336140
SD-336145
4"
6-1/8"
4-1/2"
5-3/8"
SD-336150
SD-336155
5 7-1/8" 5-1/2" 6-3/8"
SD-336160
SD-336165
6"
8-1/8"
6-1/2"
7-3/8"
SD-336180
SD-336185
8"
10"
8-3/8"
9"


We have found that, especially when quarter turn deckplates are installed in hard to access places, their function can be greatly enhanced by simply adding a wood handle to the surface of the cover. Shown here are the ones we put on the Rifleman we built. They are Mahogany - about 3.4" high by 2" by 4" long. Two 1" ss screws and large washers hold them in place. We did not use glue, but that would probably have been a good idea.

Feedback:

I wanted to say the large quarter turn deck plates are very nice but I don't think I could open them without a handle. I made the mistake of snapping one shut when you first sent them and I had to make the handle to open it. I think the lubrication you suggest will help greatly. Picture below.

George Cunningham