A marine epoxy resin ideal for fiberglass laminations, bonding, fillets and putties. Excellent wet out of fiberglass, low viscosity, easy to use 2:1 ratio. Each kit is 2/3 resin and 1/3 hardener.

Feedback:

Chuck I thought I would drop a note to let you know that I like the results I have been getting with the Marine epoxy and the medium hardener. Since I received my order the temperatures here in Central Oregon have been below forty and for the most part below thirty degrees when I have been working with the stuff. I have been using the epoxy primarily mixed with wood flour as a filler coat for fairing the inside of the hull on my Elver 20. The last day that I mixed epoxy it was only 19 degrees in the shop! So far so good all the goop has set up and I have not noticed any ill effects from the low temperatures. Thanks for another good product. I’ll be ready for sails fairly soon and will have to get a quote from you. Here are a few pictures to feed the hungry appetites of the websites followers.

Trash can heater used to add some heat during the application of epoxy in 20 degree shop! A bit scary looking with open flame inside an all wood boat!

Here are a couple links to my blog and my public photos on Flickr.

http://360.yahoo.com/dirtsailor2003

http://flickr.com/photos/dirtsailor2003/sets/

Case Turner