null

Highlander 19'6" Plans

Write a Review
SKU:
SEL-HIGHLANDER19.6
Availability:
Printed plans shipped and PDF plans emailed from Selway Fisher
$27.00 - $240.00

Description

This boat is a stretched version of the Highlander 18 for a client who wanted the biggest boat that he could comfortably trail extensively behind a medium sized family saloon without a lot of effort and which could also offer enclosed accommodation. The additional couple of feet and extra beam give enough space for sitting headroom, two internal berths (with space for two more under a boom tent) and areas for cooker etc. An outboard well, water ballast and centreboard arrangement are standard. (Other keel arrangements can be offered).
 
Construction is based upon a prefabricated structure consisting of pre-shaped centre girder, frames, transom, stem and bottom hull panel.
 
Three pairs of chine stringers are then added followed by the ply skin. A very simple and strong construction. LOD 19'6"; Beam 7'; Draft 10"/ 4'6"; Weight approx. l000lbs. Note that since the original drawings were done, the hull panels have been computer developed and the panel shapes and details are given for alternative stitch and epoxy construction (also with a rounded bow similar to the Highlander 16).
 

A lug yawl rig is also given in the plans set.

Highlander 19'6" Particulars

LOA 19'6" 5.95m
Beam 7' 2.13m
Hull Mid Depth 2' 6 1/2" 0.78m
Draft 10"/4'6" 0.25/1.37m
Sail Area 172 sq.ft 16 sq.m
Approx. Dry Weight 1000 lbs 454 kg
Hull Shape U shape with flat bottom and 3 planks per side
Construction Methods Ply over frame and stitch and tape
Major plywood requirements for hull 6 sheets of 6mm, 10 sheets of 9mm and 3 sheets of 12mm plywood
Guidance Use 4-6 adults depending on fit-out
Drawing/Design Package 8 x A1 drawings + 13 x A1 instruction sheets
Additions and alterations included with the plans Lug yawl rig
Sharp/rounded bow
More vertical transom
......and see below
View AllClose

0 Reviews

View AllClose