Prams

8ft Nuthatch Specifications Length: 7' 10"Beam: 52"Weight: 72 lbsMax Outboard: 2 hpMaximum Load: 450 lbs This design is my first and the result of endless hours spent before a computer learning the relationship between curves on a flat 2D screen to the...

This dinghy was developed from our Skylark Mk 2 series of pram dinghies. The dinghy retains the flat, rockered bottom panel and the side panels are round bilge in shape and are either cold moulded or strip planked over the moulds which are drawn full...

This is a 4' version of our Mark 2 Skylark series of pram dinghies with a beam of 3' (0.92m). The design was developed for "Wood 'n' Tots" toys as a safe fun boat for small children to learn basic water skills in. Construction is stitch and tape using a...

This design is an extended 20' Cambridge type punt but with proportionally more beam. Having said that, the beam can be easily altered by changing the width of the bottom plank/panel and frames. Two methods of construction are shown - ply plank over...

U2-HULLZ , is a wedge design that takes it to the next level. The builder has the option to construct any of 5 defined hull sizes, or anything else of their choosing. The plans are complete, and provide the builder with many options which will...

This is the last and smallest of the fly fishing hulls that I have designed. With hulls now at 8, 9, and 10 feet, there is no good reason to go either longer or shorter with a flat bottomed hull for fly fishing. If someone needs a larger hull, then one...

Piccup Pram was my first design to get built. Here is a photo of Chris Feller's up Chicago way. She is shown with the original 55 square foot rig. I still have the boat. The sail rig has been experimented with many times but the hull is identical today...

It is axiomatic that the jack of all trades does nothing well. There are exceptions, however. The Vita Dinghy is one. A list of desirable attributes might include the following: easy construction with minimal skills, low cost, permanently tight, strong...

Although only 6' long we have given her good internal volume with a beam of 3'8". This gives plenty of buoyancy in the ends of the boat so that she does not exhibit the usual tippiness of craft of this size. Her overall weight will be less than 50 lbs...

RIVER ROVER - This is a new boat, specifically designed for shallow water use, and can be constructed in different lengths and widths. The size you need is dependent on load and the number of occupants desired. Much like a pirogue, the longer hull...

This is a very simple but pretty single chine 'V' bottom dinghy designed for use as a tender, fishing boat, or with her simple lug rig, as a sail trainer for your children. Length is 7'9" (2.36m); Beam 4' (1.23m); Weight approx. 55 lbs (25 kg)...

The design of the SIMPLE 8' PRAM is in response to a request for a low cost, stable, portable boat. It includes a wide beam, good freeboard, generous volume, seating for two, and safety buoyancy. It is sturdy, easy to build, quite portable, easy to...