Tools

Keep Epoxy off your tender skin Paul B requested these so here they are. I actually have a hard time believing we have not had them all along. Sleeves are 18" long, with elastic at both ends for a secure fit and serged seams. Universal size. Sold by the...

Three pack contains: 1 each of 1/4", 3/8" and 1/2" plastic splicing fids To be used with hollow braid and twisted ropes Complete splicing instructions on back of product We got these when we added 12 strand Spectra to our store. Unfortunately, the 1/4"...

Sometimes called "mustard pumps," these dispensers deliver a measured amount of any brand laminating epoxy, The large pumps fit 1 gallon, 1/2 gallon and Raka 1 quart containers. For System3 quart and pint bottles, use the small pump. There are...

  Here is a Stainless steel fid with hardwood handle for making those eye, end, and running splices in twisted line. Hollow backside for ease of threading. From Wikipedia: A fid is a tool (basically a somewhat conical hollow spike) that can be...

A lot of builders use syringes to get epoxy in small amounts accurately into specific places. The problem is that unless you clean the syringe out, you have to dispose of it. These pipettes do the same job at a tenth the cost.Feedback:I love your...

Here is a handy fid for making those eye, end, and running splices in twisted line. T-handle gives great leverage for splicing up to 1" line. Cast Bronze - may need some polishing or smoothing.

(1/2" Crown - boxes of 5040) Raptor 19 gauge composite staples have a lot of uses around the boat shop. For instance securing scarphs on small timbers while the epoxy kicks. I was scarphing some staves for a birdsmouth mast when rather than use the usual...

Order tools HERE Make your own standing rigging Here is an economical way to make your own swaged standing rigging for your sailboat. These tools are much cheaper than the Hydraulic ones and may even cost less than a custom made set of standing rigging...

Recommended for measuring small amounts These cups are marked in cc's, oz's, ml's, and the ever popular drams. On page 17 of his excellent book "Lapstrake Canoes", David Nichols says: "The most basic [way to measure epoxy] is the 1 ounce cup. These...

High quality professional grade steel. Great for cutting holes for grommets, rings and rivets. Size matches grommet size.

RAPTOR® nails are not susceptible to the corrosion and oxidation that attacks metal, so your manufactured product retains its beautiful new appearance. RAPTOR® nails and staples can be sanded and sawed without tool damage, so you will not need to...

These ToolPro 4” Spring Clamps are strong and hold firmly. They feature rubber tips which won’t damage surfaces, and are made of nickel-plated steel with tempered steel springs. These spring clamps open to 1”. They are sold in pairs.