Bevel Boss is a ready-to-use boatbuilder's bevel board, designed and manufactured for easy, precise reading of bevels and miters. It comes in both standard (3"x12") and pocket (2"x8") sizes. We've been told by pleased users that these tools are fantastic for chair making, pattern makers, airplane builders ...
The main use of this
tool is transfering angles to and from a standard bevel
gauge. It comes with a brochure, though,
which describes a dozen other uses including how to
use it to set the depth of your router,
and how to drill
holes at specific angles.
Bevel Boss Specifications
3" x 12" x .045" hardened stainless steel plate
Non glare satin chrome finish
Deeply etched, inked markings
Angle accuracy to +/-3.5 ' of arc or .001" per inch
Resolution 1/4 degree
Bevel lines full length for each full degree 0 to 50 degrees (that is degrees off of square), short lines for half degrees and ¼ degrees marked by short lines.
Rules meet or exceed precision rule standards
3" end scale by 16ths
12" scales by 16ths read left to right and right to left
Hanging hole provided
"I don't know how I got along without my Bevel Boss. It fills a gap in layout tools that you don't realize you have until you start using it. I was actually using my chop saw to measure angles - very awkward. Bevel Boss makes it so much easier. And I can use the end scale for setting router and table saw cut depths. It's one of the most versatile and useful tools in my entire toolbox."
--Jason Taylor, finish carpenter
Feedback:
From: Don Peck Sent: Saturday, September 03, 2005 6:37 AM To: duckworks Subject: Re: Thank you for your order!
Dear Sandra,
I received the Bevel Boss last Wednesday. Thank you for the quick mailing. Its quality far exceeds my expectations, and although I'll be using it mostly during renovations to our Cape, I plan to employ it when I build myself a wooden sailboat to ply the Maine coastline...one of many things to do on my wish list!
