Potter 15 & 19

These stainless electropolished Anchor Hangers attach securely to any 7/8 to 1” rail or pulpit and will hold most Danforth and Fortress-style anchors up to 35 pounds, flukes down to prevent snagged lines. Allows for quick release. Easy to install...

West Wight Potter-15 Factory Stem Fitting

The cockpit drain looks like the photo - two drain fittings, a couple feet of Bilgeflex hose, and some stainless hose clamps

These vents bring fresh air into a stuffy cabin. Can be used with a dorade box for an all-weather installation. Made from Dip Molded PVC Dia. Height Mtg. Hole Int. Color 3" 5" 3-3/4" Red

This is the factory Potter mast step and will fit most years (some early models are different). The factory riveted the mast foot insode the mast, but 10/32 drill and tap works fine as well.

These are the factory West Wight Potter 19 tangs - Long tangs (6") and short tangs (3")

These U-bolts are used for the chainplates on the Potter 15 and for the Baby Stay on the Potter 19

sold individually - mounting fasteners not included

Heavy Stainless Steel Factory West Wight Potter Anchor Roller - 10.5" length by 2.25" wide.

Boom vang system for Potter 15 or 19. Includes Ronstan block, combo V-jam block, shackle, 2 eye straps, and proper length of polyester double braid.

C.S. Johnson Pulpit Anchor. Lots of potential uses for these stainless fittings that slip around and affix on 1" tubing of rails or pulpits, providing a ½" hole to which you can attach a block, lifeline jaw fittings, etc. This piece is a standard part...

Garhauer Component Block. Aluminum block will handle up to ¼" line. Good as cheek block or organizer and is commonly used on centerboards. Factory block for the West Wight Potter 19 centerboard. Comes with a pair of 3-inch stainless bolts, stainless...